DATA SHEET ? SKY65048-360LF LOW NOISE AMPLIFIER
Measuring NF
Special care should be taken when making < 1 dB NF
measurements. Ideally, measurements should be made in an RF
shield room. An Agilent MXA N9020A spectrum analyzer with an
internal pre-amp paired with an N4001A smart noise source was
used for all noise measurements. The smart noise source has an
internal thermocouple that automatically sets the T COLD setting on
the analyzer. If a smart noise source is unavailable, a standard
low Excess Noise Ratio (ENR) source should be used. Use an
external thermocouple to manually adjust the T COLD setting to
ensure accurate results.
Table 2. SKY65048-360LF Absolute Maximum Ratings
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY65048-360LF are
provided in Table 2. The recommended operating conditions are
specified in Table 3 and electrical specifications are provided in
Table 4.
Performance characteristics for the SKY65048-360LF are
illustrated in Figures 3 through 30.
Parameter
Supply voltage
Input power
Supply current stage one
Supply current stage two
Power dissipation
Channel temperature
Storage temperature
Operating temperature
Thermal resistance
V DD
P IN
I DS 1
I DS 2
P DIS
T J
T STG
T OP
Q JC
Symbol
Minimum
–65
–40
Typical
5.5
+15
100
100
665
150
47
Maximum
+125
+85
Units
V
dBm
mA
mA
mW
C
C
C
C/W
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value.
CAUTION : Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY65048-360LF Recommended Operating Conditions
Supply voltage
Supply current
Parameter
V DD
I DD
Symbol
Minimum
4.75
30
Typical
5.00
85
Maximum
5.25
100
Units
V
mA
Skyworks Solutions, Inc. ? Phone [781] 376-3000 ? Fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com
201101D ? Skyworks Proprietary Information ? Products and Product Information are Subject to Change Without Notice ? November 12, 2009
3
相关PDF资料
SKY65116-21 IC AMP LINEAR 390-500MHZ 12-MCM
SKY65137-11 IC AMPLIFIER FOR 802.11 SMD MCM
SKY65338-21 IC FRONT END 450-470MHZ 12-MCM
SKY65405-21-EVB BOARD EVAL FOR SKY65405-21
SKY67012-396LF RF AMP 600MHZ LNA 8DFN
SKY67013-396LF RF AMP 1.5GHZ LNA 8DFN
SKY73012-11 IC QUADRATURE DEMOD 32-RFLGA
SKY73032-11 IC MIXER DWNCONVRSN SGL 20-MCM
相关代理商/技术参数
SKY65048-360LFB 制造商:Skyworks Solutions Inc 功能描述:RF & MW LNA
SKY65049-360LF 功能描述:射频放大器 1.7-2.4GHz Gain 17dB NF .7dB RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
SKY65050-372LF 功能描述:射频放大器 .45-6.0GHz NF .45dB Gain 15.5dB @ 2.4GHz RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
SKY65050-372LF_EVB 制造商:Skyworks Solutions Inc 功能描述:Eval Board for SKY65050-372LF , Bulk
SKY65050-372LFB 制造商:Skyworks Solutions Inc 功能描述:RF SMALL SIGNAL TRANSISTOR PHEMT
SKY65050-372LF-EVB 功能描述:BOARD EVAL FOR SKY65050-372 RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件,板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
SKY65051-377LF 功能描述:射频放大器 450-6000MHz NF .65dB Gain 15.5dB RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
SKY65052-372LF 功能描述:射频放大器 450-6000MHz NF .85dB Gain 16.0dB RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel